Mimaki UJF-3042 UV Printer
- Product Code: UJF-3042
- Availability: In Stock
-
4,000.00€
- Ex Tax: 4,000.00€
| UJF-3042MkII e | |||
|---|---|---|---|
| Printhead | On-demand piezo printhead (3 printheads arranged in a staggered line) | ||
| Print resolution | Maximum: 1200 x 1200 dpi | ||
| Maximum printable area | Width: 300mm Length：420mm (A3 size) | ||
| Ink | Type/Color | LH-100 (C, M, Y, K, W, Cl) LUS-120 (C, M, Y, K, W, Cl) LUS-150 (C, M, Y, K, W) PR-200 (Primer) | |
| Packaging | LH-100, LUS-120, PR-200: 250 ml bottle / 1 L bottle LUS-150: 1 L bottle | ||
| Media | Thickness | 153 mm (6 in) or less | |
| Weight | 5 kg (11 lb) or less | ||
| Certifications | VCCI class A / FCC class A / ETL IEC 62368-1 / CE Marking (EMC, Low voltage, Machinery directive, and RoHS) / CB / REACH / Energy Star / EAC / RCM | ||
| Interface | Ethernet / USB2.0 | ||
| Noise level | Standby mode: 55dB or less (FAST-A, measured1 m away from the source) Continuous operation: 65 dB or less Discontinuous operation: 70 dB or less | ||
| Power supply | Single-phase AC100-240V, ±10%, 50/60Hz ±1Hz | ||
| Power consumption | 1,000W or less | ||
| Operational environment | Temperature | 20 - 30 degC (68 - 86 degF) | |
| Humidity | 35 - 65％Rh (Non condensing) | ||
| Recomended Temperature | 20 - 25 degC (68 - 77 degF) | ||
| Temperature change | ±10 degC (±50 degF) /h or less | ||
| Dust level | Equivalent to a general office floor level | ||
| RIP software | RasterLink7 (Bundled) | ||
| Dimensions (W × D × H) *1 | 1,355 mm × 1,290 mm × 856 mm (53.4 in × 50.8 in × 33.7 in) | ||
| Weight | 135 kg (297.6 lb) | ||
*1: Heights of ink bottles are not included.
- Inks would not be cured when printing speed is faster than that of draft mode.
- Some of the screens and printing samples in this website are artificial renderings.
- Specifications are subject to change without notice.
- All trademarks or registered trademarks are the property of their respective owners.
- Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.
Precautions for UV printing
Inks and substrates:
- Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
- Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.
Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:
- Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
- Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
- In addition, please read the instructions and guidelines of the manual carefully and follow those.
Dependable productivity with industry-leading printing speed
The UJF-3042MkII e is capable of printing approximately 38 A4-size sheets per hour.
*Print conditions: 4-color, draft mode (600 × 600 dpi, 8 Pass)
UJF-3042MkII e: Print speed /4-color (C, M, Y, K) printing
Head layout capable of simultaneous two-layer printing
The staggered printhead arrangement enables simultaneous printing of two layers of color and spot colors, maintaining high productivity.
UJF-6042MkII e and UJF-3042MkII EX e can be equipped with light color inks (Lc / Lm), thus CMYK + LcLm + Spot colors (W+W, W+Cl, W+Pr or Pr+Cl) color set is possible.
By adding light colors, smoother gradation and natural skin tones can be expressed.
*Dependent on the ink-setting; simultaneous printing might not be possible in every case.
Configuration of printhead
Advanced mechanical structure assists value-added print products
Table-driven printing delivers superior quality image
To reduce printer unit vibration, the print table moves vertical direction during printing without moving the upper unit of the printer. In addition, to achieve higher positional accuracy, two ball screws are installed on both sides of the table to assist table movement. The precise droplet placement reduces-gloss banding issues and enables creating more valuable print products. In addition, the noise level of this model is remarkably reduced compared to the conventional model; thus, this printer can be installed in an office.
Direct printing on an object up to 153 mm thick
The printable object can be as thick as 153 mm (*1). Moreover, the advanced sensor detects even a transparent object (*2). The new model accepts a range of materials with simple set-up steps.
*1: To utilize this feature, spacers are required depending on the thickness of the object. The spacer is one of accessories.
*2: Depending on object size or form, the sensor may not detect the object properly.
Fully covered print table improves the safeness of the printer
Lift-up table cover
The fully covered print table prevents accidents involving operator contact with the printer carriage. It also maintains print quality by reducing dust adhesion.